AYRUS Technologies
+91 98664 65829 Request an Enquiry

Cable Assembly Services

Cable assemblies are how power, signals and data move reliably between the parts of your product. We manufacture cable assemblies to customer drawings and specifications — from single power leads to multi-branch signal assemblies.

Overview

What this service covers

Cable assemblies are how power, signals and data move reliably between the parts of your product. We manufacture cable assemblies to customer drawings and specifications — from single power leads to multi-branch signal assemblies.

Work is performed against controlled documentation: your drawing defines the construction, the bill of materials defines the components, and the test requirements define what must be verified before an assembly ships.

Scope areaWhat it includes
Power & signal assembliesMulti-conductor and single-conductor builds for power distribution and signal interconnect.
Shielded constructionsShielding, grounding and termination done to drawing — for assemblies where noise immunity matters.
Connector terminationCrimped and soldered terminations, with the correct tooling and contact systems for the connector series specified.
Strain relief & jacketingBackshells, heat-shrink, sleeving and strain relief as called out by the drawing.
Identification & markingWire marking, cable labels and assembly tags that make installation and service straightforward.
Electrical verificationContinuity checks as standard, with further testing — such as insulation or hipot testing — as agreed for the job.
Configurations are confirmed at enquiry. Supported wire types, connector series, board technologies and test methods are confirmed against your specification before we quote — so what is promised is what is built.
Patch-panel cable assembly with colour-coded cables and labelled connectors

Colour-coded, labelled assemblies make installation and service work faster. Photo credits.

Enquire about Cable Assemblies

Send your drawings and requirement details — we respond with scope confirmation and next steps.

Request an Enquiry

+91 98664 65829 Email

Applications

Where cable assemblies are used

Typical applications for this capability — specific project experience for your application is confirmed during enquiry.

Machine & equipment wiring

Power and signal assemblies that route inside industrial machines and equipment — built to the lengths and terminations the machine design calls for.

Panel-to-panel interconnects

Assemblies that connect cabinets, panels and subsystems, with connectors and labelling chosen so installation is unambiguous.

Test benches & fixtures

Repeatable interconnects for production and engineering test setups, where consistent assemblies keep test results comparable.

Product sub-assemblies

Cable-level sub-assemblies supplied into larger product builds, ready for integration by your production line.

Buyer notes

What experience teaches about cable assemblies

Consistency across quantities

The first assembly sets the standard; the fiftieth should match it. Documented builds — drawing, BOM, work sequence — are what make that repeatable. When a job runs in batches, the documentation is what keeps batch 3 identical to batch 1, and job records are what let any question be answered months later.

Sourcing models

Cable assembly work supports two material models: customer-consigned material, where you supply wire, cable and connectors against your approved sources; and turnkey sourcing, where materials are procured to your specification. Hybrid models — you consign the critical items, we source the standard ones — are common. The model is agreed before quoting, because it changes both price and lead time.

What a complete enquiry looks like

An assembly drawing with connector callouts, a BOM where one is needed, the test requirements that apply, the quantity, and the delivery dates you are working to. With that in hand, a supplier can quote precisely; without it, quotes are guesses that get revised later.

Process

How the work proceeds

Every assembly job begins with a documentation check: your drawing is reviewed for completeness, materials are confirmed, and any questions are raised before assembly starts. During assembly, work follows the documented build sequence; completed assemblies are then tested and inspected before packing.

STEP 1

Requirement & documentation review

Your drawings, BOM and specifications are reviewed, and questions are raised early.

STEP 2

Assembly

The job is built to the documentation by trained assemblers, following the agreed work instructions.

STEP 3

Verification & packing

Agreed checks and tests are performed and recorded; the assembly is labelled and packed for delivery.

FAQ

Technical FAQ

Can you build from our drawings?

Yes — assemblies are manufactured to your drawings and specifications. If a drawing is incomplete or ambiguous, we raise questions before starting, so the finished assembly matches your intent.

What quantities do you support?

From prototype and low-volume builds through production runs. Tell us the quantity and schedule in your enquiry and we will confirm what we can support.

Can you source the materials?

Material sourcing models — customer-supplied, turnkey, or a mix — are agreed per job during enquiry.

What testing is included?

Continuity verification is standard on cable assemblies. Additional testing such as hipot or insulation resistance is agreed with you and quoted as part of the job.

Do you have a minimum order value?

Minimums depend on the job. For small prototype requirements, send the enquiry — we will tell you directly whether it fits.

Can you match an existing sample if we have no drawing?

Often, yes — a sample plus your specification can be reverse-documented into a build drawing that you approve before production. Raise it in your enquiry and we will tell you what is involved.

How are assemblies packed for shipment?

Coiled without sharp bends, protected at connector ends, labelled and packed so assemblies arrive as they left the bench. Packaging requirements beyond this are agreed per job.

Related services

Cable Forms

Multi-cable forms and bundles shaped to your assembly geometry, with branch points, breakouts and identification done cleanly and consistently.

View service

Semi-Rigid & RF Cable Assemblies

Semi-rigid and RF cable assemblies for high-frequency applications — precise lengths, careful forming and clean connector terminations.

View service

Electronic Module & LRU Assembly

Electronic module, LRU, test-jig and rack assembly — integrating boards, wiring, connectors and panels into finished, testable units.

View service

PCB Assembly & Testing

Printed circuit board assembly and testing — assembly of your boards with agreed inspection and test steps from incoming to final checks.

View service

Need cable assemblies?

Send your drawings, specifications and quantities — we will confirm scope and next steps.

Request an Enquiry All Services